{"product_id":"burncycle-expansions-board-game-insert-organizer","title":"Burncycle + Expansions Board Game Insert \/ Organizer","description":"This is an insert \/ organizer for burncycle, all of its released expansions (as of December 2023), and the Brassmag Volumes 1 and 2.  It all fits in the core box, has no lid lift, supports vertical storage, and was designed to aid setup and teardown.\u003cbr\u003e\u003cbr\u003eThere is a set of setup trays that can remain in the box after setup, and a set of in-game trays that you place on the table.\u003cbr\u003e\u003cbr\u003eSetup Trays\u003cbr\u003e\u003cbr\u003eThree bot trays with custom-shaped openings that hold the Brassmags, bot chips, and any related bot dice.  The bots are organized alphabetically, but as shown in the photos, the sides of the trays are cut low enough that you can read the bot names on the chips.  The following bots are in each tray (from left to right):\u003cbr\u003e--Bot Tray 1: Access, Bit, Byte, Casing, Cathode, Crash, and Exe\u003cbr\u003e--Bot Tray 2: Firewall, Gyro, Interface, Lithium, Memory, and Nano\u003cbr\u003e--Bot Tray 3: Packet, Processor, Servo, Subroutine, Torrent, and Transmitter\u003cbr\u003eA captain tray that holds all the captain Brassmags with their corresponding chips.  These are also in alphabetical order.  Starting from the lower left, the captains are:\u003cbr\u003e--Row 1:  Brigade (with all Phalanx chips), Chrak (with a hole for inserting his spear to be held under his Brassmag), Crucible, and Fauxbia\u003cbr\u003e--Row 2: Grimms, iBoss, and Latticewerk\u003cbr\u003e--Row 3:  Leer, Stamp, Tendril, and Zuk  \u003cbr\u003eA room tile “cabinet” with four drawers that slide out and lock in place when closed. The room tiles are never stacked more than four deep in any drawer, making it much easier to find the rooms you are looking for during setup.  \u003cbr\u003eTwo large card holders.  One holds the missions separated by corporation, with an extra slot for the adaptive missions.  The second card holder is for the bots, captain, and up to four sets of reference cards. You can also fit the original smaller reference cards in there, too.\u003cbr\u003eA network\/corporation setup tray that holds the CEO chips, CEO network level die, CEO ping markers, the four player network level dice, and the three red beads for tracking threat and the burncycle.\u003cbr\u003eSeparate player trays for the tracking pegs in each player color.  There is one tray for each player color.\u003cbr\u003eA bag tray that can hold the premium bag and the regular bag.\u003cbr\u003eTwo rings to hold the network and floorplan mats in a single roll.  These are marked with “L” and “R” labels to identify which goes on the left side and which goes on the right.  If you orient them with those labels pointing upward, as shown in the photos, you’ll be in good shape.  The left ring angles downward to accommodate the user manuals and the large room tiles. The right ring has a cutout that holds the corporation cards in place.\u003cbr\u003e\u003cbr\u003eIn-Game Trays \u003cbr\u003e\u003cbr\u003eA tray that holds the command module’s blue tracker pegs, the green open door pegs, the blue and clear beads for tracking objectives and surveillance status of rooms, the surveillance dice, the burncycle die, the ping die, and one set of player tracker pegs.  If you are a solo player, you can just get out this tray and won’t need to dig into the separate player peg tray.  Just choose your favorite player color and store the pegs in this one tray.\u003cbr\u003eTwo trays that each hold a set of action dice.  If you only own one set, the other tray will mainly serve as a spacer to keep everything tidy if you store the game vertically.\u003cbr\u003eA tray with custom-shaped slots to hold the Brassmag guards for easy access during the game.\u003cbr\u003eA chip tray to hold the all the chips you use during the game, other than the bot and captain chips, which are in the setup trays above.  I designed this tray so each chip type is directly accessible from either the front or the back of the tray.  No need to sift through rows of chips to get what you need.  The only exception is the first player chip, which is in the middle of a row.  But you only need to get that one out during setup.\u003cbr\u003eAn equipment dice tray where you can sort the equipment dice by number.\u003cbr\u003eA small card tray that holds the equipment, mod, imperative, and keypad cards.  It also holds the red keypad die next to the keypad cards (hopefully alleviating confusion between it and the similar-looking red ping die).\u003cbr\u003eA network and terminal card tray.  This tray has a slot at the rear that can hold upright your captain and\/or mission card.\u003cbr\u003eA discard tray for holding your discarded small cards, network cards, and terminal cards.  This tray also has a slot for holding upright your captain and\/or mission cards.  This is an optional tray that was mainly to be used as a spacer to keep things orderly if you store the box vertically, but I wanted to give it an additional purpose in case you want to use it for discards during the game.\u003cbr\u003e\u003cbr\u003eThis is a 3D printed product and may contain small points of discoloration or banding\/lines, especially on white prints. These are completely normally for a non-painted 3D print and do not harm the form or function of the product. Board game inserts will ship if there are minor markings or lines in the print that do not impact the overall function of the print but will be reprinted or replaced if marks are bigger than the size of a pencil eraser head.\u003cbr\u003e\u003cbr\u003eThis product was designed by JS500 on Printables and is produced using a commercial license.\u003cbr\u003e\u003cbr\u003eIf you have any custom requests for this insert to include custom text additions, colors, or modifications, please reach out to us prior to ordering.","brand":"Buzz3DPrints","offers":[{"title":"Black","offer_id":48028843409653,"sku":"sku-sp-48028843409653","price":150.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":48028843442421,"sku":"sku-sp-48028843442421","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/3471\/8197\/files\/il_fullxfull.6321008725_1pye.jpg?v=1778882637","url":"https:\/\/buzz3dprints.com\/products\/burncycle-expansions-board-game-insert-organizer","provider":"Buzz3DPrints","version":"1.0","type":"link"}